The Dell Analog KVM switches, engineered by Avocent, are ideally suited for environments where remote access is not required but maximum security is essential.
The Dell Analog KVM switches, engineered by Avocent, are ideally suited for environments where remote access is not required but maximum security is essential. The Analog Server Console Switch is an excellent choice where real-time video and mouse response are required. Its responsiveness is not impacted by the need to digitize and transmit video frames, mouse and keystroke events. For high resolution requirements of a Network Operation Center, the Server Console switches can support resolutions of up to 1600×1200 and widescreen resolutions of up to 1680×1050.
The Analog KVM Server Console Switches provide flexibility to customers who may want to implement remote access in the future, but who are not ready to make that commitment at the time of purchase. The digital capabilities of the Server Console Switch are ‘unlocked’ by plugging the Dell Remote Access Key into any one of the USB ports of the rear of the switch. With the Dell Remote Access Key installed, one authenticated digital user can remotely manage any one of the servers connected to the Server Console Switch over a TCP/IP network with support for DES, 3DES, AES or 128-bit SSL encryption of both KVM and Virtual Media sessions over a single IP address.
Note: the Analog KVM Server Console switches are not compatible with the Dell DMPIQ-SRL, Dell Serial Interface Pod or the Avocent DSRIQ-SRL .
ReadyRails™ static rails for toolless 1U mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded and 2-post (Telco) racks. Mount this Dell KVM in the same U space with your Dell KMM (DKMMLED185) by adding PN DRMK-77 / A7485911. This is the exclusive 1U mounting bracket for the Dell DMPU and DAV KVM products. Standard Three-Year Warranty (requires registration within 90 days) – 8/5 coverage of your hardware, 10- to 14-day RMA post receipt of failed unit.
Form Factor
1U or 0U rack mount (with optional brackets)
Dimensions
1.72 x 17.00 x 9.20 in. (Height x Width x Depth)
Weight
7.0 lb (3.2 kg)
Device Connectors
16 ARI ports for servers or serial devices, 2 ports for power distribution units, 4 USB 2.0 ports
Remote Access
1 remote user w/ Remote Access Key option, 10/100 Mbps Ethernet port
Local Access
2 local ports
VM/CAC Support
Virtual Media support over USB, Common Access Card (CAC) capability for smart cards, 128-bit SSL, AES, DES and 3DES encryption
Features Include
Agentless control and access for 1 remote user w/ the Remote Access Key, Single-stack IPv4 or IPv6 access, Flash-upgradeable firmware for SCS and SIPs
Video Support
Analog VGA, SVGA, and XGA
Video Support
16:10 widescreen, up to 1680 x 1050
Video Support
4:3 standard, up to 1600 x 1200
Management Software
OSCAR™ On-Screen Display for local access, OBWI w/ Remote Access Key option, Compatible with Avocent DSViewTM management software w/ Remote Access Key option
Rack Support
ReadyRails™ static rails for toolless 1U mounting in 4-post racks with square or unthreaded round holes or tooled mounting in 4-post threaded and 2-post (Telco) racks
Power Supplies
1 power supply unit
Connector
IEC C14
Type
Internal
Power
18W
Heat dissipation
47 BTU/hr
AC input range
00 - 240 VAC
AC frequency
50/60 Hz auto-sensing
AC input current rating
5 A
AC input power (maximum)
20W
Environmental Operating
32 to 122 degrees Fahrenheit (0 to 50 degrees Celsius)
Environmental Non-operating
-4 to 158 degrees Fahrenheit (-20 to 70 degrees Celsius)
Environmental
Airflow is from non-port side (Front) to port side (Back)
Supported SIPs
Multi-platform support: PS/2 (DSAVIQ-PS2M) and USB (DMPUIQ-VMCHS) or low cost options PS/2 (DPS2IAC-10) and USB (DUSBIAC-10). Also support for Avocent PS/2, PS2M, USB, Sun, USB2, VMC modules; Dell PS/2, USB, USB2-VM, USB2-VM+CAC SIPs
